72x72mm Flush Joint aluminium downpipe access plate to allow for the pipe system to be rodded and cleared in the event of a blockage. Typically set at 300mm above ground level, a 50mm diameter hole is cut into the downpipe face and the plate is fixed over using the self tapping screws provided. The backing plate is supplied with an EPDM seal to the rear.
If you are unsure of your requirements our expert technical team will be pleased to assist. Whether you have a list of parts, architectural drawings or hand sketches please email us you details.
We have a range of installation videos to assist contractors and show how our products are installed.
Our installation guides are available for download and give step by step pictorial instruction.
Our product data sheets contain all relevant information relating to our products. Each sheet also contains interactive tabs linking to other useful resources.
Used by building material specifiers, our product specification sheets give the relevant clauses and product details to be used in building design documents.
Architectural eaves gutter drawings that can be copied into architectural drawings ensuring correct construction design details are followed.
This document explains how to correctly size gutters according to roof size - in full accordance with the BS EN12056-3 gravity rainwater drainage design standard.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.